天山云杉人工幼林树冠结构及其在林分间伐中的应用研究

本文对天山云杉人工幼林树冠结构以及树冠结构与林木之间的关系进行了研究，并基于生物学原理，在确定有效树冠的法础上，通过决定林木能力的树冠特征对其人林分间伐中的应用进行了初步研究。     

SSR-based genetic linkage analysis of resistance to crown rust (Puccinia coronata f. sp. lolii) in perennial ryegrass (Lolium perenne)

Crown rust (caused by Puccinia coronata f. sp. lolii) is a serious foliar disease of the pasture and turfgrass perennial ryegrass (Lolium perenne). Previous genetic studies have detected both qualitative and quantitative resistance mechanisms, and interpretation of the genetic system is complicated by variation within the sexually reproducing pathogen. Resistant and susceptible parental genotypes of ryegrass were identified using a composite urediniospore population collected from three geographically distinct locations. A two-way pseudo-testcross mapping population was obtained as the F₁ progeny of the pair-cross between ryegrass parental genotypes Vedette₆ and Victorian₉. Both parents showed intermediate resistance against a pathogen population collected in a single geographical zone (Hamilton, Victoria), but in the F₁ population, significant variation for a range of resistance-associated characters was detected. Statistical analysis of phenotypic data suggested a major gene effect, hence bulked segregant analysis with map-assigned simple sequence repeat (SSR) markers was used to scan the genome. A marker showing strong association with resistance was assigned to linkage group (LG) 2 of perennial ryegrass. Analysis of 11 LG2 SSR markers defined an interval between loci xlpssrh03f03 and xlpssrk02e02 as containing the gene or genes (LpPc1) conferring crown rust resistance. Resistance gene determinants were inherited from both parents, with up to 80% of the total phenotypic variation explained by markers segregating from Vedette₆ and up to 26% of the variation explained by markers segregating from Victorian₉. The two contributions together resulted in an additive increase in effect, with fully resistant individuals requiring determinants from both parents. A conserved syntenic relationship was observed with linkage group B of Avena strigosa, which is the location of a cluster of resistance genes to the oat form of crown rust. The implications of this study for marker-assisted selection of disease resistance in perennial ryegrass are discussed.     

新疆柽柳幽柽木虱的生物学特性

在新疆的柽柳属植物上发现3种木虱，对其中的柽柳幽柽木虱进行了研究。该种木虱在新疆阜康地区1年发生1代，以4龄若虫在柽柳多年生枝条上越冬。越冬若虫翌年4月中旬开始取食，并使枝条顶端形成虫瘿，若虫在虫瘿内发育到5龄，至6月开始羽化，成虫平均寿命7．3d。雌成虫将卵产在花苞内，若虫在花苞内取食形成虫瘿，4龄若虫10月中旬爬出虫瘿转移到多年生枝条上越冬。发现若虫寄生蜂1种。     

剪叶对茭白肉质茎膨大的影响

以 1个单季茭和 1个双季茭茭白品种为试材 ,在肉质茎开始膨大时进行不同程度的剪叶处理 ,结果表明 :各处理在开始膨大后最初几天内干、鲜质量差异不明显 ;剪去叶片对肉质茎膨大影响不大 ,但切除叶鞘后 ,肉质茎膨大初期以后的干、鲜质量显著下降 ;整株剪叶比单茎剪叶处理对肉质茎膨大的影响大 ,剪去叶片与切除叶鞘、叶片表现相似。由此认为 ,茭白肉质茎膨大所需养分主要依靠短缩茎和叶鞘在肉质茎膨大前的积累 ,肉质茎膨大过程中植株茎蘖间存在养分交流 ,品种间在膨大速率上有一定差异。     

苜蓿根和根颈腐烂病病原及防治研究进展

综述了国内外苜蓿Medicago sativa根和根颈腐烂病的病原研究、品种抗病性鉴定及其防治方法的研究进展,为该病害的进一步研究提供理论依据.     

气吸式大豆精密排种器排种性能试验研究

在精密播种机中,精密排种器是其工作的核心部件,工作性能直接制约了播种机播种性能的优劣。为了探究影响气吸式排种器工作性能的主次因素,以大豆气吸式排种器为研究对象进行了台架性能试验测试。试验确定排种盘转速为影响排种器排种性能的主次因素,气室负压为次要因素;排种盘转速为20 r/min,气室负压为5 k Pa时该大豆气吸式排种器排种性能最优,合格指数高达91.13%。该研究结果对排种器结构改进以及性能优化提供了参考依据。     

浙江红花油茶高接换冠成活率影响因素研究

为研究浙江红花油茶高接换冠成活率影响因素,解决嫁接成活率低的问题,2013年6月从中国林业科学研究院亚热带林业研究所引进浙江红花油茶优树穗条,在青田县大垟山林场开展浙江红花油茶高接换冠试验,分析砧木林郁闭度、坡位、砧木生长势及接穗保存时间等因素对嫁接成活率的影响。结果表明,林分郁闭度在0.3~0.7之间,随着郁闭度增加嫁接平均成活率提高;郁闭度在0.7~0.9之间,随着郁闭度增加,嫁接成活率降低;当郁闭度为0.7时,嫁接成活率最高为88.8%。山腰的嫁接成活率高达86%,显著高于山顶和山脚。浙江红花油茶砧木生长势越强嫁接成活率越高。接穗于采集当天嫁接效果最好成活率达89.1%,接穗保存1、2、3、4、5、6天嫁接,成活率分别为85.2%、75.2%、51.6%、28.1%、12.2%、9.3%。偏相关分析表明,各因素对嫁接成活率影响由大到小依次为接穗保存时间(-0.97)、郁闭度(0.85)、生长势(0.81)、坡位(-0.65)。     

垂叶榕瘿花发育特性的初步研究

研究榕属植物瘿花发育特性是理解榕树/榕小蜂协同进化内在机制的重要内容。本文解析了垂叶榕隐头花序伴随瘿花发育的 5 个发育时期，采用同工酶电泳的方法比较了瘿花与正常雌花同工酶（包括过氧化物酶、过氧化氢酶、淀粉酶和酯酶）谱带的差异，采用扫描电镜对比了瘿花壁与授粉后雌花子房壁的差异。结果表明，瘿花被榕小蜂产卵以后，至少启动了一个与消除过氧化物有关的酶；而且，瘿花子房壁结构疏松，内含物小而少，雌花子房壁结构致密且内含物多而大，说明瘿花发育所消耗的营养物质大于正常雌花发育的消耗。研究结果支持造瘿生物汇集营养与植物防御行为的互利假说。     

Root architecture of sorghum genotypes differing in root angles under different water regimes

Plant root architecture offers the potential for increasing soil water accessibility, particularly under water-limited conditions. The objectives of this study were to evaluate the root architecture in two genotypes of sorghum (Sorghum bicolor (L.) Moench) differing in root angles and to assess the influence of different deficit irrigation regimes on root architecture. The response of two sorghum genotypes, ‘Early Hegari-Sart’ (EH; steep root angle) and ‘Bk7’ (shallow root angle) to four irrigation treatments was investigated in two replicated outdoor studies using large pots. The results indicated that EH possessed steeper brace and crown root angles, fewer brace roots, greater root biomass, and root length density than Bk7 at deeper soil depths (i.e., 15–30 and 30–45 cm) compared with a shallower depth (i.e., 0–15 cm). Across the soil profile, EH had greater root length density and length of roots of small diameter (<1 mm) than Bk7. Accordingly, EH showed more rapid soil-water capture than Bk7. Different levels of irrigation input greatly affected root architecture. Severe deficit irrigation (25% of full crop transpiration throughout the season) increased the angle and number of crown roots, root biomass, and root length density compared with 75 and 100% of full crop transpiration treatments. Consequently, root system architecture can be effectively manipulated through both genotypic selection and irrigation management to ensure optimal performance under different levels of soil available water.